The FinePix V10 uses an NP-40 lithium-ion battery. Replacing and maintaining the Fujifilm FinePix V10 camera battery differs from older NiMH batteries. The key is to avoid overcharging, over-discharging, and overheating.
After powering off the camera, open the battery compartment and remove the old battery in the correct orientation. Insert the new NP-40 battery. Keep the metal contacts clean; if oxidized, gently clean them with an eraser. Do not use metal tools to pry the Fujifilm FinePix V10 camera battery to avoid short circuits, punctures, or compression. Discontinue use immediately if the Fujifilm FinePix V10 Camera Batteryis bulging or leaking.
Initial Activation: New lithium-ion batteries are factory activated and do not require a 12-hour charge. Use the battery normally until it is low, then fully charge it. Repeat this 3-5 full charge and discharge cycles to help the cells reach a stable state. Afterward, charge the Fujifilm FinePix V10 camera battery normally; deep discharge is not necessary each time.
Routine Maintenance of Fujifilm FinePix V10 Camera Battery
Lithium-ion batteries have no memory effect, so shallow charging and discharging are recommended: Charge the Fujifilm FinePix V10 camera battery when the charge level is below 20%, and remove it when it reaches 80%–90%. Avoid prolonged overcharging; remove the battery promptly after it is fully charged. The optimal charging temperature for the Fujifilm FinePix V10 camera battery is 10°C–35°C, and the optimal storage temperature is 15°C–25°C. Avoid high temperatures, extreme cold, and humidity. A decrease in charge level in cold environments is normal; the Fujifilm FinePix V10 Camera Battery can be warmed up before use.
Long-Term Storage
If the camera will not be used for more than one month, remove the Fujifilm FinePix V10 camera battery from the camera and charge it to 40%–50% before storing. Never store it fully charged or completely discharged. Recharge the Fujifilm FinePix V10 Camera Battery to approximately 50% every 6 months to prevent damage from over-discharge.
3.7V 1250mAh Replacement Camera Battery for Fujifilm NP-40
Upgrade your Fujifilm FinePix V10 Z1 Z2 Z3 Z5FD with the high-performance 1250mAh NP-40 battery, engineered with advanced circuit board technology to deliver exceptional performance and extended usage for your Fujifilm FinePix V10 Z1 Z2 Z3 Z5FD. Designed for reliability and longevity, this battery ensures your device stays powered throughout the day.”Find the best Fujifilm Camera Battery price! Search Batteriesfast.co.uk for Fujifilm Camera Battery. Get fast shipping and top-rated customer service.