Infinix X600 Smartphone BatteryModel Number: Usually the original manufacturer’s label, but generic replacement battery models are often labeled by sellers as “BL-43J1H” or “X600 battery”.
Battery Specifications: Typical capacity is approximately 2200mAh, voltage is 3.8V, it is a standard lithium polymer battery with a flat plug.
How to Determine if You Need to Replace Your Infinix X600 Smartphone Battery
? If your phone has been used for many years and exhibits the following characteristics, it is likely that you need to replace the battery: Sudden Drop in Battery Life: Only a few hours of use on a full charge, or even rapid battery drain in standby mode. Abnormal Charging: Charging time is too long, or it stops charging at a certain percentage (e.g., 80%).
Unexplained Shutdown/Restart: The phone automatically shuts down when the battery level shows 20%-30%, but can be turned on again when plugged in to the charger. Battery Swelling: The most dangerous sign! If the phone’s back cover is pushed up, the screen bulges, or it sits unevenly on a table, please stop using it immediately and replace it as soon as possible. A bulging battery poses a risk of combustion. Infinix X600 Smartphone Battery Replacement
Solutions (in recommended order)
Solution 1: DIY Replacement (Recommended, Lowest Difficulty)
The Infinix X600’s back cover is removable, and the battery is also a removable design, which greatly facilitates user replacement.
Tools Needed: Only a small Phillips screwdriver and a plastic pry tool/nail (for assisting in opening the back cover).
Replacement Steps: Power off the phone. Open the back cover: Locate the recess on the side of the phone and pry open the back cover with your fingernail or pry tool. It is secured by clips and does not require heating. Remove the old battery:
Infinix X600 Smartphone Battery
Usually secured by a plastic clip or a small piece of tape. Gently peel off the securing device and pull the battery out directly by pinching the edge with your hand or a plastic tool (do not puncture the battery with metal tools). Install the new battery: Place the new battery in the battery compartment in its original position, align it with the connector, and gently press it into the motherboard socket. Then fasten the securing device.
Replace the back cover: Align the back cover with the clips and gently press around the edges until fully secured. Charging and testing: Charge to 100%, then use the phone normally and observe if the battery life returns to normal.
Option Two: Go to a professional repair shop
Take your phone and a newly purchased battery (which can also be purchased at a repair shop) to any mobile phone repair shop.
Option Three: Contact official after-sales service (may have discontinued service)
Due to the age of this model, Infinix may no longer provide spare parts and services for it. This option is the least feasible.
SummaryReplacing the battery of an Infinix X600 smartphoneis a very simple DIY project, thanks to its removable back cover and removable battery design. This is much easier than replacing the battery of a modern unibody phone.
3.8V 4.35V 4040mAh/15.6WH Replacement Smartphone Battery for Infinix BL-40BX
Upgrade your Infinix X600/Note 2 with the high-performance 4040mAh/15.6WH BL-40BX battery, engineered with advanced circuit board technology to deliver exceptional performance and extended usage for your Infinix X600/Note 2. Designed for reliability and longevity, this battery ensures your device stays powered throughout the day.
“Find the best Infinix Smartphone Battery price! Search Batteriesfast.co.uk forInfinix Smartphone Battery.Get fast shipping and top-rated customer service